You are here

Pilot-scale demonstration of SPORL for bioconversion of lodgepole pine to bioethanol and lignosulfonate

Posted date: July 28, 2016
Publication Year: 
2016
Authors: Zhou, Haifeng; Zhu, Junyong; Gleisner, Roland; Qiu, Xueqing; Horn, Eric; Negron, Jose
Publication Series: 
Scientific Journal (JRNL)
Source: Holzforschung

Abstract

The process sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) has been the focus of this study. Pilot-scale (50 kg) pretreatment of wood chips of lodgepole pine (Pinus contorta Douglas ex Loudon) killed by mountain pine beetle (Dendroctonus ponderosae Hopkins) were conducted at 165°C with a dilute sulfite solution of pH 2 for bioconversion to ethanol and lignosulfonate (LS). The pretreatment duration was optimized in laboratory bench scale experiments with a certain severity based on a combined hydrolysis factor (CHF). The sodium bisulfite loading was 8% and the liquor to wood ratio 3. The pretreated solids were disk milled together with the spent liquid and the resultant slurry with a 25% solids content was directly (without detoxification) submitted to a simultaneous enzymatic saccharification and fermentation (SSF) with Saccharomyces cerevisiae YRH400 at cellulase loading of 35 ml kg-1 of untreated wood. At solids loading of 20%, the alcohol yield was 288 l t-1 wood (with a final concentration of 52.2 g l-1), which corresponds to a 72.0% theoretical yield based on total glucan, mannan, and xylan. The LS from SPORL was highly sulfonated and its molecular weight was lower than that of a purified commercial softwood LS, and therefore it has a high potential as a directly marketable co-product.

Citation

Zhou, Haifeng; Zhu, J.Y.; Gleisner, Roland; Qiu, Xueqing; Horn, Eric; Negrón, José. 2016. Pilot-scale demonstration of SPORL for bioconversion of lodgepole pine to bioethanol and lignosulfonate. Holzforschung. 70(1): 21–30.