USDA Forest Service
Contact Us
design graphic design graphic Graphic logo Wildland Fire Chemical Systems
Graphic logo for Wildland Fire Chemical Systems

Wildland Fire Chemicals

Table of Contents

  • Standard Test Procedures, Section 1—Health, Safety, and the Environment
    • STP 1.1—Review of Disclosure Information (Revised 4/27/06)
    • STP 1.2—Risk Assessment (Revised 11/20/06)
    • STP 1.3—Mammalian Toxicity (Revised 4/19/06)
    • STP 1.4—Biodegradability (Revised 4/19/06)
    • STP 1.5—Fish Toxicity (Revised 4/19/06)
    • STP 1.6—Photo-Enhanced Fish Toxicity (Revised 4/26/06)
    • STP 1.7—Cleveland Open Cup Flash Point and Fire Point (Revised 4/19/06)

  • Standard Test Procedures, Section 2—Fire Tests
    • STP 2.1—Combustion Retarding Effectiveness
    • STP 2.2—Lateral Ignition and Flame Spread Test (Revised 11/20/06)

  • Standard Test Procedures, Section 3—Determination of Optimum Mixing Test
    • STP 3.1—Long-Term Retardants
    • STP 3.2—Class A Foams
    • STP 3.3—Water Enhancers

  • Standard Test Procedures, Section 4—Physical Properties
    • STP-4.1—Salt Content (Revised 5/1/06)
    • STP-4.2—Refractometer Reading (Revised 4/28/06)
    • STP-4.3—Density (Revised 2/28/06)
    • STP-4.4—pH (Revised 4/28/06)
    • STP-4.5—Brookfield Viscosity (Revised 4/28/06)
    • STP-4.6—Marsh Funnel Flow-Through (Revised 5/1/06)
    • STP-4.7—Product Fluidity (Revised 5/2/06)

  • Standard Test Procedures, Section 5—Material Effects
    • STP 5.1—Uniform Corrosion Test
    • STP 5.2—Intergranular Corrosion Tests
    • STP 5.3—Effects on Non-Metallics (Revised 11/30/06)
    • STP 5.4—Abrasion Test

  • Standard Test Procedures, Section 6—Product Stability Tests
    • STP 6.1—Outdoor Storage
    • STP 6.2—Viscosity Loss
    • STP 6.3—Resistance to Microbial Growth

  • Standard Test Procedures, Section 7Pumpability Test

  • Standard Test Procedures, Section 8—Class A Foam Effectiveness Tests
    • STP 8.1—Surface Tension (Revised 5/4/06)
    • STP 8.2—Wetting Ability (Revised 5/15/06)
    • STP 8.3—Foaming Ability (Revised 5/5/06)
    • STP 8.4—Foam Expansion
    • STP 8.5—Foam Drain Time
    • STP 8.6—Miscibility (Revised 5/9/06)

  • Standard Test Procedures, Section 9—Water Enhancer Effectiveness Tests
    • STP-9.1—Enhanced Water Mixture Retention on a Dowel Tree (Revised 5/15/06)
    • STP-9.2—Enhanced Water Mixture Evaporation Rate (Revised 5/15/06)
    • STP-9.3—Water Retention of Enhanced Water Mixtures (Drain Rate) (Revised 5/15/06)
    • STP-9.4—Photo-Degradation (Revised 5/16/06)
    • STP-9.5—Effect of Water Quality (Revised 5/16/06)
    • STP-9.6—Effect of Water Temperature (Revised 5/16/06)

  • Standard Test Procedures, Section 10—Visibility Test
    • STP 10.1—Laboratory Visibility Tests
    • STP 10.2—Opacity
    • STP 10.3—Field Visibility

  • Standard Test Procedures, Section 11Air Drop Characteristics Test

  • Standard Test Procedures, Section 12Operational Field Evaluation Test

  • Standard Test Procedures, Section 13Lot Acceptance and Quality Assurance

  • Standard Test Procedures, AppendixSources of Referenced Documents

  • Glossary

Back  

Top  
Accessibility |  Disclaimers |  FOIA |  Privacy Policy |  Quality of Information design graphic