Trail
Metadata also available as
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator: USDA Forest Service / I-Web
- Publication_Date:
-
REQUIRED: The date when the data set is published or otherwise made available for release.
- Title: Trail
- Geospatial_Data_Presentation_Form: vector digital data
- Other_Citation_Details: <http://basenet.fs.fed.us/products/gis/MetadataHTM/index.shtml>
- Online_Linkage:
-
\\ds.fs.fed.us\EFS\\FS\NFS\GiffordPinchot\Program\ResourceInfoMgmt\GIS\Workspace\iward\IWeb\IWebGDB\Extract_Transportation.mdb
- Description:
-
- Abstract:
-
A route system depicting all trails within or in close proximity to an administrative unit.
- Purpose:
-
A trail is a linear feature constructed for the purpose of allowing the free movement of people, stock, or Off Highway Vehicles (OHV). Route measurements and route directions must correspond to those stored in the Infra Oracle table RTE_BASICS.
- Supplemental_Information: Created from extract of IWebGDB.mdb downloaded 1/22/2010.
- Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date:
-
REQUIRED: The year (and optionally month, or month and day) for which the data set corresponds to the ground.
- Currentness_Reference:
-
REQUIRED: The basis on which the time period of content information is determined.
- Status:
-
- Progress: REQUIRED: The state of the data set.
- Maintenance_and_Update_Frequency: As needed
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -122.505856
- East_Bounding_Coordinate: -121.344220
- North_Bounding_Coordinate: 46.844464
- South_Bounding_Coordinate: 45.643466
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus:
-
REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.
- Theme_Keyword: Trail
- Access_Constraints: none
- Use_Constraints:
-
The Forest Service uses the most current and complete data available. GIS data and product accuracy may vary. They may be developed from sources of differing accuracy; accurate only at certain scales; based on modeling or interpretation; incomplete while being created or revised; etc. Using GIS products for purposes other than those for which they were created, may yield inaccurate or misleading results. The Forest Service reserves the right to correct, update, modify or replace GIS products without notification.
- Point_of_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: USDA Forest Service / I-Web
- Native_Data_Set_Environment:
-
Microsoft Windows 2000 Version 5.2 (Build 3790) Service Pack 2; ESRI ArcCatalog 9.3.1.3000
- Cross_Reference:
-
- Citation_Information:
-
- Title: I-Web intranet site
- Online_Linkage: <http://i-web.wo.fs.fed.us/index.shtml>
- Cross_Reference:
-
- Citation_Information:
-
- Title: Travel Routes Data Dictionary
- Online_Linkage: <http://fsweb.r6.fs.fed.us/eng/travel_routes/user_board>
- Data_Quality_Information:
-
- Positional_Accuracy:
-
- Horizontal_Positional_Accuracy:
-
- Horizontal_Positional_Accuracy_Report:
-
Accuracy testing must use NSSDA testing guidelines or be reported based on compiled, published test reports appropriate for the data collection method and equipment. The method of determining accuracy should be documented in the process step of the dataset metadata record. If published accuracy results are used, use the statement 'Compiled to meet ___ (meters, feet) horizontal accuracy at 95% confidence interval' in the metadata record, and identify the testing source used. If accuracy is locally tested to NSSDA standards, the statement 'Tested to meet ___ (meters, feet) horizontal accuracy at 95% confidence interval' should be added to the metadata record.
Accuracy for legacy data may be reported according to the accuracy standard in place at the time of data collection (typically National Map Accuracy Standards). Document the standard used in the metadata record.
(For more information, see: <http://www.fgdc.gov/standards/documents/standards/accuracy/chapter3.pdf>)
- Lineage:
-
- Source_Information:
-
- Source_Scale_Denominator:
-
Best available source with a target scale of 1:24000 for Continental U.S., Puerto Rico, and Hawaii and 1:63360 for Alaska.
- Process_Step:
-
- Process_Description: Metadata imported.
- Source_Used_Citation_Abbreviation:
-
T:\FS\NFS\GiffordPinchot\Program\ResourceInfoMgmt\GIS\DataMaintTransportation\Data\Metadata\Transportation_Transportation_Trail.xml
- Process_Date: 20100122
- Process_Time: 15571800
- Process_Step:
-
- Process_Description:
-
Downloaded the the IWeb Sample personal geodatabase from <http://basenet.fs.fed.us/products/gis/MetadataHTM/index.shtml> on 1/22/2010. Used the Extract Data Wizard from the Distributed Geodatabase toolbar in ArcMap. Extracted Schema Only and all feature classes from the Transportation feature dataset in IWebGDB.mdb and specified the spatial reference by importing it from T:\FS\Reference\GIS\r06_gip\Data\Transportation.mdb\Transportation\Road.
- Process_Date: 20100122
- Process_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Irene Ward
- Process_Step:
-
- Process_Description:
-
Load trail featureclass from T:\FS\NFS\MtBakerSnoqualmie\Program\ResourceInfoMgmt\GIS\Workspace\rcavaille\mt_baker_map\mbrd_data.mdb\Trails
- Process_Date: 20100504
- Process_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Ron Cavaille
- Contact_Voice_Telephone: 360-956-2316
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Vector
- Point_and_Vector_Object_Information:
-
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: String
- Point_and_Vector_Object_Count: 0
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: G-polygon
- Point_and_Vector_Object_Count: 0
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: G-polygon
- Point_and_Vector_Object_Count: 0
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Planar:
-
- Map_Projection:
-
- Map_Projection_Name: Albers Conical Equal Area
- Albers_Conical_Equal_Area:
-
- Standard_Parallel: 43.000000
- Standard_Parallel: 48.000000
- Longitude_of_Central_Meridian: -120.000000
- Latitude_of_Projection_Origin: 34.000000
- False_Easting: 600000.000000
- False_Northing: 0.000000
- Planar_Coordinate_Information:
-
- Planar_Coordinate_Encoding_Method: coordinate pair
- Coordinate_Representation:
-
- Abscissa_Resolution: 0.000100
- Ordinate_Resolution: 0.000100
- Planar_Distance_Units: meters
- Geodetic_Model:
-
- Horizontal_Datum_Name: North American Datum of 1983
- Ellipsoid_Name: Geodetic Reference System 80
- Semi-major_Axis: 6378137.000000
- Denominator_of_Flattening_Ratio: 298.257222
- Vertical_Coordinate_System_Definition:
-
- Altitude_System_Definition:
-
- Altitude_Resolution: 0.000100
- Altitude_Encoding_Method:
-
Explicit elevation coordinate included with horizontal coordinates
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Trail
- Entity_Type_Definition:
-
A route system depicting all trails within or in close proximity to an administrative unit.
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: OBJECTID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: GlobalID
- Attribute_Definition:
-
Globally Unique Identifier for each feature, managed by ESRI software.
- Attribute:
-
- Attribute_Label: REV_DATE
- Attribute_Definition: Date of feature creation or latest update.
- Attribute_Definition_Source:
-
FS Feature Level Metadata standard column. <http://www.fs.fed.us/gac/metadata/feature_level.html>
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
The revision date field is populated with the compilation date for the feature. Tasks associated with each revision should be documented in the process steps of theme-based metadata.
- Attribute:
-
- Attribute_Label: DATA_SOURCE
- Attribute_Definition: Feature data source code
- Attribute_Definition_Source:
-
FS Feature Level Metadata standard column <http://www.fs.fed.us/gac/metadata/feature_level.html>
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 1
- Enumerated_Domain_Value_Definition: Original CFF
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 2
- Enumerated_Domain_Value_Definition: GPS Uncorrected Data
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 3
- Enumerated_Domain_Value_Definition: GPS Differentially Corrected Data
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 4
- Enumerated_Domain_Value_Definition: GPS Survey Grade and Sub-meter
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 5
- Enumerated_Domain_Value_Definition: Resurvey Plat
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 6
- Enumerated_Domain_Value_Definition: Photogrammetric Compilation
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 7
- Enumerated_Domain_Value_Definition: Digitized From Hardcopy PBS/SEQ
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 8
- Enumerated_Domain_Value_Definition: Digitized From Hardcopy Orthophoto quad
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 9
- Enumerated_Domain_Value_Definition: Automated Lands Project (ALP)
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 20
- Enumerated_Domain_Value_Definition: Digitized Other
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 21
- Enumerated_Domain_Value_Definition: Geographic Coordinate Database (GCDB)
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 22
- Enumerated_Domain_Value_Definition: Other Cadastral Information
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 23
- Enumerated_Domain_Value_Definition: Other Agency Digital
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 24
- Enumerated_Domain_Value_Definition: Other
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 30
- Enumerated_Domain_Value_Definition: Remote Sensing Data Base Level
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 31
- Enumerated_Domain_Value_Definition: Remote Sensing Data Mid Level
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 32
- Enumerated_Domain_Value_Definition: Remote Sensing Data Broad Level
- Enumerated_Domain_Value_Definition_Source:
- Enumerated_Domain:
-
- Enumerated_Domain_Value: 33
- Enumerated_Domain_Value_Definition: Remote Sensing Data National Level
- Enumerated_Domain_Value_Definition_Source:
- Attribute:
-
- Attribute_Label: RTE_CN
- Attribute_Definition:
-
Control number generated in Oracle to uniquely identify each route across all Forest Service units. The value is brought from Oracle and used as a unique identifier for each spatial feature. It is used to join each route to the corresponding rows in the views GC_RTE_BASICS_V, GC_ROADS_V, and GC_TRAILS_V by matching with the column RTE_CN.
- Attribute:
-
- Attribute_Label: BMP
- Attribute_Definition:
-
Beginning measure point of the route. The value is copied from Oracle (RTE_BASICS) and used as an aid in calibration.
- Attribute:
-
- Attribute_Label: EMP
- Attribute_Definition:
-
Ending measure point of the route. The value is copied from Oracle (RTE_BASICS) and used as an aid in calibration.
- Attribute:
-
- Attribute_Label: RT_ACTION
- Attribute_Definition: Identifies the status of the calibration of the route.
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: CALIBRATED
- Enumerated_Domain_Value_Definition:
-
The route is properly calibrated to the bmp/emp values in RTE_BASICS.
- Enumerated_Domain:
-
- Enumerated_Domain_Value: REMEASURE
- Enumerated_Domain_Value_Definition:
-
The route needs to be re-calibrated to the bmp/emp values in RTE_BASICS.
- Enumerated_Domain:
-
- Enumerated_Domain_Value: MCALIBRATE
- Enumerated_Domain_Value_Definition:
-
The route is properly calibrated to the BMP/EMP values in RTE_BASICS and has had mid-point calibration performed with internal calibration points at road.
- Enumerated_Domain:
-
- Enumerated_Domain_Value: MANUAL
- Enumerated_Domain_Value_Definition: User will calibrate the route manually.
- Attribute:
-
- Attribute_Label: ACCURACY
- Attribute_Definition:
-
Distance (+/-), in dataset distance units, of expected difference between feature and real world object locations.
- Attribute_Definition_Source:
-
FS Feature Level Metadata standard column. <http://www.fs.fed.us/gac/metadata/feature_level.htm>
- Attribute_Domain_Values:
- Attribute:
-
- Attribute_Label: Shape_Length
- Attribute_Definition: Length of feature in internal units.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Positive real numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: Name
- Attribute_Definition:
-
Name of the trail. This information is maintained in the Infra Trails application.
- Attribute:
-
- Attribute_Label: ACTIONSTAMP
- Attribute_Definition: The date that the value was placed into the ACTION item.
- Attribute:
-
- Attribute_Label: TRL_NO
- Attribute_Definition:
-
The local identifier for the trail. The Trail number should be unique within a forest.
- Overview_Description:
- Distribution_Information:
-
- Resource_Description: Downloadable Data
- Metadata_Reference_Information:
-
- Metadata_Date: 20100504
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Irene Ward
- Contact_Organization:
-
REQUIRED: The organization responsible for the metadata information.
- Contact_Address:
-
- Address_Type:
-
REQUIRED: The mailing and/or physical address for the organization or individual.
- City: REQUIRED: The city of the address.
- State_or_Province: REQUIRED: The state or province of the address.
- Postal_Code: REQUIRED: The ZIP or other postal code of the address.
- Contact_Voice_Telephone:
-
REQUIRED: The telephone number by which individuals can speak to the organization or individual.
- Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
Generated by mp version 2.9.6 on Sat May 08 00:48:57 2010