;{CR10X}
;
;
;---------------------=== T107TEST ===-------------------------
;
;Redwood Sciences Lab
;USDA Forest Service
;R. Eads
;Revised: 7/14/00

;The program reports water temperature (wtemp) and air temperature
; (atemp) in the Numeric window.

;Water:
;  SE 5
;  E2
;Air:
;  SE 4
;  E2

;Program executes every 15 sec., some self-heating in the thermistors
; may lead to small errors if running the program for extended periods

*Table 1 Program
  01: 15        Execution Interval (seconds)

;Test CSI Temperature probe model 107

1:  Temp (107) (P11) ; water temp
 1: 1        Reps
 2: 5        SE Channel
 3: 2        Excite all reps w/E2
 4: 1        Loc [ wtemp     ]
 5: 1        Mult
 6: 0        Offset

2:  Temp (107) (P11) ; air temp
 1: 1        Reps
 2: 4        SE Channel
 3: 2        Excite all reps w/E2
 4: 2        Loc [ atemp     ]
 5: 1        Mult
 6: 0        Offset

3:  If time is (P92)
 1: 0000     Minutes (Seconds --) into a
 2: 1        Interval (same units as above) ;        write out record
 3: 30       Then Do

4:  Do (P86)
 1: 10       Set Output Flag High (Flag 0) ;         set flag to write out data

5:  Real Time (P77)
 1: 1120     (Same as 1220) Y,D,Hr/Mn ;              write date/time to record

6:  End (P95) ;                                     end table

*Table 2 Program
  02: 0.0000    Execution Interval (seconds)

*Table 3 Subroutines

End Program

-Input Locations-
1 wtemp     1 0 1
2 atemp     1 0 1
3 _________ 1 0 0
4 _________ 0 0 0
5 _________ 0 0 0
6 _________ 0 0 0
7 _________ 0 0 0
8 _________ 0 0 0
9 _________ 0 0 0
10 _________ 0 0 0
11 _________ 0 0 0
12 _________ 0 0 0
13 _________ 0 0 0
14 _________ 0 0 0
15 _________ 0 0 0
16 _________ 0 0 0
17 _________ 0 0 0
18 _________ 0 0 0
19 _________ 0 0 0
20 _________ 0 0 0
21 _________ 0 0 0
22 _________ 0 0 0
23 _________ 0 0 0
24 _________ 0 0 0
25 _________ 0 0 0
26 _________ 0 0 0
27 _________ 0 0 0
28 _________ 0 0 0
-Program Security-
0000
0000
0000
-Mode 4-
-Final Storage Area 2-
0
-CR10X ID-
0
-CR10X Power Up-
3