;{CR10X}

;----------------------=== ISCO_C3 ===-------------------

;Redwood Sciences Lab
;USDA Forest Service
;Revised: 11/14/2002

;Tests ISCO relay circuit on CR510 or CR10X using Port 3 (C3)
;  with the ISCO disconnected
;Program executes every 15 sec. with relay on for 3 seconds
;To test the cicuit with the ISCO connected change the execution
;  interval to 180 (3 minutes)

*Table 1 Program
  01: 15        Execution Interval (seconds)

1:  Z=F (P30)
 1: 300      F ;                  <========      Enter in the delay time that
 2: 00       Exponent of 10 ;                    port #3 needs to be pulsed to
 3: 1        Z Loc [ delay     ] ;               trigger an isco sample
;                                                100 = 1 second

2:  Pulse Port w/Duration (P21)
 1: 3        Port ;               <========      Port C3
 2: 1        Pulse Length Loc [ delay     ]

3:  Do (P86)
 1: 10       Set Output Flag High (Flag 0)

*Table 2 Program
  02: 0.0000    Execution Interval (seconds)

*Table 3 Subroutines

End Program

-Input Locations-
1 delay     1 1 1
2 _________ 0 0 0
3 _________ 1 0 0
4 _________ 0 0 0
5 _________ 0 0 0
6 _________ 0 0 0
7 _________ 0 0 0
8 _________ 0 0 0
9 _________ 0 0 0
10 _________ 0 0 0
11 _________ 0 0 0
12 _________ 0 0 0
13 _________ 0 0 0
14 _________ 0 0 0
15 _________ 0 0 0
16 _________ 0 0 0
17 _________ 0 0 0
18 _________ 0 0 0
19 _________ 0 0 0
20 _________ 0 0 0
21 _________ 0 0 0
22 _________ 0 0 0
23 _________ 0 0 0
24 _________ 0 0 0
25 _________ 0 0 0
26 _________ 0 0 0
27 _________ 0 0 0
28 _________ 0 0 0
200 _________ 1 0 0
-Program Security-
0000
0000
0000
-Mode 4-
-Final Storage Area 2-
0
-CR10X ID-
0
-CR10X Power Up-
3